Evolution Automatic LT & HT

These fully automatic, battery‑operated hand strapping tools are smart‑technology enabled so all setups can be done on a smart phone or tablet.

• Set + lock tensioning force, welding time + operating mode on touch screen or via smart phone or tablet
• All essential information on tool’s LED display
• Intuitive, easy to master operation
• Lever free design enahcnes safety and reduces operator fatigue
• Availabile in 2 models:

Evolution LT: For medium-duty applications, pulling up to 600 lbs of tension. Designed for straps ranging from 1/2" - 5/8"
Evolution HT: For heavier-duty applicaitons, pulls up to 1,000 lbs of tension. Accommodates wider straps from 5/8" - 3/4"

Evolution Semi-Automatic 

Three models available to fit your packaging needs:
B400: Pulls up to 450 lbs tension, strap sizes:  3/8″, 7/16″, 1/2″, 5/8″, .019 – .030

B800: Pulls up to 850 lbs tension, strap sizes: 5/8″ – 3/4″, .025 – .040

B1000: Pulls up to 1125 pounds of tension. No special change parts are required to adjust for strap width or thickness.

• Strap Size: 5/8″ – 3/4″, .035 – .050
• 80% joint efficiency

Battery Powered P328, P329 & P331

These Fromm battery-powered, hand-strapping tools prioritize simple one-handed operation and are fully covered for finger protection. Control tension force and sealing time with simple knobs and shift between semi-automatic or automatic operation at the touch of a button.  Available in 3 different models:

P328: High tension force up to 2600N / 585 lbs
P329: High tension force up to 4000N / 900 lbs
P331: High tension force up to 7000N / 1575 lbs, can replace heavy steel strappin applications

Included features for all three tools:

• Brushless motor for less maintenance and improved life time
• Improved plates and guides – less effort to remove the tool from the strap
• No tension rocker – easier to remove tool from small package surfaces
• Motor temperature monitoring to protect motor from overheating
• Cycle counter included (special reader required)
• Battery well protected
• Battery charge indicator included
• Optional motor cooling fan available to reduce overheating risk

Pneumatic P357 & P358

The Fromm P357 and P358 cover a wide range of strap widths from 12mm to 19mm and thicknesses from .016” to .053.” With a seal efficiency of over 75%, they have the ability to pull up to 900 lbs and are ready for the most demanding applications.

• Choose your own operation mode – manual or semi-automatic – using the external selection screw
• Easy strap threading – both straps are inserted together
• Sealing time and strap tension are easy to adjust
• Strap tension can be blocked for a consistent seal result
• Compressed air can be connected to the tools either on top of the main housing or at the rear end
• A signalization pin shows you the end of each strapping cycle, to warrant an optimal seal cooling time 
• For packages with a rough and hard surface, a bottom-base wearing plate is available as accessory
• In cases where soft packages are to be strapped, a plastic bottom-base protection plate is available

Manual Tensioners

Manual tensioners are essential tools for applying and securing plastic strapping in various packaging and bundling applications. PAC Strapping offers a diverse range of manual tensioners designed to accommodate:

• Different strap sizes and materials
• General use versus heavy duty use
• General-use tension versus extreme tension
• Designs specific for polyester strapping
• Designs specific for cord strapping

Manual Sealers

Manual sealers are vital tools for securing plastic strapping by crimping seals, ensuring that packages remain tightly bound during handling and transit. PAC Strapping Products offers a comprehensive range of manual sealers designed to accommodate:

• Various strap sizes and thickness
• Plastic versus polyester material
• General versus tougher applications
• Serrated sealing